10-ton gas-fired aluminum melting furnace and supporting production
equipment
Equipment technical data: Single furnace rated capacity: 10 tons of
aluminum; Maximum capacity of a single furnace: 11 tons of
aluminum;
The thermal power of the matching burner is 4 million kcal/hour,
and the melting efficiency is about 4 tons/hour.
Melting furnace+combustion system footprint size: (length * width *
height) 5.5 * 3 * 4.5 meters; Single furnace natural gas
parameters: workshop main pipeline dn40, 0.1-0.2MPA. Reserved port
parameters near the equipment: adjustable from 5-15kpa, flow rate
of 100 cubic meters per hour.
Main pipeline parameters: DN40 pipe diameter. Pressure 0.1-0.2MPA,
flow rate 500 cubic meters per hour,
circulating water 10 cubic meters per hour per casting machine.
8 cubic meters of compressed air per hour.
Description of refractory materials for melting furnace: Furnace
wall (refractory material thickness 400mm): insulation fiber
board+refractory fiber blanket+insulation brick+anti-seepage
pouring layer+refractory layer (high alumina brick); Furnace bottom
(refractory material thickness 400mm): insulation fiber
board+refractory fiber blanket+insulation brick+anti-seepage
pouring layer+refractory layer (non stick aluminum pouring parts
for the melt pool); Furnace top (low cement pouring material
thickness 300mm): low cement pouring parts+insulation pouring
parts);
Natural gas indicators: The natural gas usage pressure can be
adjusted from 0-15kpa; Natural gas flow rate: 100 cubic meters per
hour; Pre made
Reserved pipe port DN40; The purchaser shall provide manual valves
and natural gas pressure reducing valves on the main side of the
natural gas pipeline;
Aluminum ingot casting machine dimensions: 22 * 2.1 * 2 meters;
Rated casting efficiency of 5 tons/hour; Maximum casting speed of 7
tons/hour;
Aluminum ingot dimensions: 680 * 100 * 50mm; Single weight
adjustable from 5-6.5kg; Pile size 680 * 680 * 1150mm;
Dimensions of Stacking Machine: 5 * 7 meters
Ash processing machine size: 2.4 * 2.1 * 3.5 meters;
